Papailias Incorporated - Window Wipers

Download Window Wiper PDF

Type I Window Wiper
Low Pressure Applications

For low pressures of 15 PSIG/F.V. (1 Barg/F.V.), the Type I window wiper's direct, thru-the-glass mechanism is simple, reliable and wipes away residue on the inside surface of the lens. Temperature rating: 400 Degrees F (204 Degrees C) with Teflon blade, 350 Degrees F (177 Degrees C) with Silicon blade. Type I window wiper is available for NW50, NW80, NW100, NW125, NW150, NW200, SV80, SV100 and SV125. These wipers may also be used in combination with Series MSL and PL100 or larger illuminators.

All interior wetted parts of the Type I wiper are constructed of stainless steel.

Specify as TYIWW Sightglass size.

Size	A		B		C		D		E
Size	Inches	MM	Inches	MM	Inches	MM	Inches	MM	Inches	MM
NW50	3 15/16	100	9/16	15	3 5/8	92	4	102	1	26
NW80	4 15/16	125	9/16	15	3 5/8	92	4	102	1 13/32	36
NW100	5 7/8	150	9/16	15	3 5/8	92	4	102	1 7/8	48
NW125	6 7/8	175	9/16	15	3 5/8	92	4	102	2 3/8	61
NW150	7 7/8	200	9/16	15	3 5/8	92	4	102	2 7/8	73
NW200	9 13/16	250	3/4	19	3 5/8	92	4	102	3 7/8	98

Type II Window Wiper
High Pressure Applications

For higher pressures up to 200 PSIG/F.V. (13.8 Barg/F.V.) with properly rated lens. For use with weld-in applications only. The Type II window wiper has a unique, thru-the-flange design, with flexible drive shaft that turns a spring-loaded, full-face wiper blade for efficient cleaning. All interior wetted parts constructed of stainless steel. Temperature rating: 400 Degrees F (204 Degrees C) with Teflon blade, 350 Degrees F (177 Degrees C) with Silicon blade. Available for NW100, NW125, NW150 and NW200.

Specify as TYIIWW-Sight glass size.

Size	A		B		C		D
Size	Inches	MM	Inches	MM	Inches	MM	Inches	MM
NW100	4 3/4	120	3 11/16	93	3	77	4 3/8	110
NW125	5 7/8	148	4 1/8	105	3	77	4 3/8	110
NW150	6 3/4	172	4 3/4	120	3	77	5 1/8	130
NW200	8 3/4	22	5 13/16	147.5	3	77	5 1/8	130

245 Pegasus Ave.
Northvale, NJ 07647
201-767-4027
sales@papailias.com